Alpine S2-A120M

Alpine S2-A120M S-Seeria 1-kanaliga võimendi 1 x 1200W @ 2 Ohm

 The next generation of Alpine S-Series amplifiers are designed to take your car audio experience to the next level without breaking the bank. With a sleek new redesign and upgraded features from their predecessors, these amplifiers offer exceptional performance and power on an affordable budget.

The next generation S-Series S2-A120M mono subwoofer amplifier makes it a lot easier to get great bass in your vehicle, delivering up to 1200 Watts RMS power @ 2 Ohms. This massive power output allows to even run multiple subs from a single amplifier. A variable bass boost allows you to dial in some extra punch and impact for more low-frequency enjoyment. You can even add an optional wired remote to control the level of bass from your front seat.

A built-in low-pass filter puts you in command of the frequency spectrum that reaches your sub. The amp includes pre-amp- and speaker-level inputs, so you can install it in almost any vehicle, even one with a factory radio. When using the speaker-level inputs, the amp can sense the incoming signal and turn itself on, eliminating the need to run a separate turn-on wire to the receiver or fuse box.

S-Series amplifiers are available in two mono, a 4-channel and a 5-channel configuration.

The New 2023 S-Series Amplifiers
Entry-level sound just got elevated with the S2-A120M Mono Amplifier. Its sleek design houses an Alpine Class-D amplifier circuit with 1200 Watts of powerful bass performance.

Unparalleled Power
Alpine’s S-Series S2-A120M 1200W Mono Amplifier is the perfect solution for unparalleled power and performance on a budget. With a power output of 1200W at a 1 Ohm or 2 Ohm drive, this mono amp is capable of driving even the most demanding subwoofers, delivering clean and distortion-free bass for a wide range of applications.

Flexible Application
New to the Next-Generation S-Series amplifiers is a new selectable remote turn-on circuit, a three-position switch that ensures the amplifier turns on and off at the proper times. This design is crucial with newer, in-vehicle technology and allows for proper integration with any factory or aftermarket system.

Easy Control Access
The amplifier was intentionally designed with sound controls located on the side panels, instead of the top panel, making it easier to access gain and crossover controls when installed under vehicle seats or in shallow-depth locations. Removable end caps were added to cover the side controls and connections, providing a clean, sleek finish to the amplifier.

Power a Dual Subwoofer System
Delivering an impressive 1200 Watts of power at both 1 Ohm and 2 Ohm, the S2-A120M is fully capable of providing ample power to two Alpine S-Series or Type-G 10’’ or 12’’ subwoofers, ensuring exceptional sound quality and optimal performance.

Made for S-Series Speakers & Subs
The S-Series amplifiers are designed to perfectly match the Alpine S-Series speaker and subwoofer line for perfect system building. S-Series components are designed to for customers that want to build a great sounding system without breaking the bank, for a fun and great sounding experience including Hi-Res Audio capabilities.

Next-Gen Alpine S-Series Amplifiers: Power and Performance on a Budget
Watch as Alpine Brooks gives you an overview of the next generation of Alpine S-Series Amplifiers, which are designed to take your car audio experience to the next level without breaking the bank. With a sleek new redesign and upgraded features from their predecessors, these amplifiers offer exceptional performance and power on a budget. If you’re looking to upgrade your car’s factory audio system, the S-Series Amplifiers from Alpine could be for you.

00:00 - Intro
00:26 - Hi-Res Audio Certified
00:56 - Models & Overview
01:12 - Key Features of the 4 & 5 Channel Amps
02:41 - Key Features of Mono Amps
03:55 - Wrap Up

 FEATURES
Install

    Terminal Layout: Two-sided
    Included terminal covers
    Screw terminals (for speaker and power cables)

General

    Class-D Amplification (Digital)
    Channel Design: Mono Channel
    Side panel controls
    Thermal Management Control
    Top Mounted LED Power/Status Indicator
    Speaker Level Input
    3 turn-on modes (DC HI, Remote HI, Remote LO)
    Input Channel Selector Switch for Subwoofer
    Crossover: Variable Low-pass Filter (LPF)
    Adjustable Gain Control
    Bass EQ
    Remote Bass Control (RUX-KNOB2) Ready

SPECIFICATIONS
RMS Power Ratings

    Per Channel into 1 Ohms, 14.4V (≤1%THD+N): 1 x 1200W
    Per Channel into 2 Ohms, 14.4V (≤1%THD+N): 1 x 1200W
    Per Channel into 4 Ohms, 14.4V (≤1%THD+N): 1 x 600W

Sound Tuning

    Crossover: Variable LPF: 50-400Hz (-24dB/oct)
    Bass EQ (+12dB)

General

    Power Requirements: 14.4 V.DC (9 - 16 V allowable)
    Input Sensitivity (RCA Input): Hi: 0.5V - 10V / Low: 0.2V - 4.0V
    High Level Input with automatic power on
    Frequency Response (+0, -3dB: 1W into 4 ohms): 10Hz – 400Hz
    THD+N (@ 10W into 4 Ohms): <0.03%
    Damping Factor: >750
    Weight: 4.0kg

Dimensions

    Heat Sink (WxHxD) mm: 352 x 57 x 210