Alpine S2-A55V

Saadavus: Toode on laos
335.00 €

Kiirülevaade

Alpine S2-A55V S-Seeria 5-kanaliga võimendi 4 x 60W + 1 x 300W @ 2 Ohm The next generation of Alpine S-Series amplifiers are designed to take your car audio experience to the next level without breaking the bank. With a sleek new redesign and upgraded features from their predecessors, these amp ...
Saadaval olevate toodete tarneaeg on 2-4 tööpäeva pärast kliendi tellimuse tasumist (raha laekumist Akustika.EE OÜ pangakontole). Kui tellitud kaup pole pärast tellimuse esitamist saadaval või on ette näha viivitust tarneajas, võtame Teiega ühe tööpäeva jooksul ühendust.

Järelmaksu võimalused

ESTO Järelmaks
Liisi järelmaks
Arvuta kuumakse  
+

Alpine S2-A55V S-Seeria 5-kanaliga võimendi 4 x 60W + 1 x 300W @ 2 Ohm

 The next generation of Alpine S-Series amplifiers are designed to take your car audio experience to the next level without breaking the bank. With a sleek new redesign and upgraded features from their predecessors, these amplifiers offer exceptional performance and power on an affordable budget.

The S-Series S2-A55V 5-channel amplifier delivers 60 Watts RMS @ 2 Ohms of pristine high-fidelity signal to each of your car’s front and rear speakers while powering a subwoofer with up to 300 Watts RMS at the same time. The amp’s combination of Hi-Res Audio capabilities in its 4-channel section and extra bass power from the sub channel brings your music to life, with all the precise details, pounding beats, and emotional power clearly revealed. For a 3-channel 2-way system, you could also use the amp to drive a pair of front high-performance speakers with 120 Watts RMS each, while powering a subwoofer with 300 Watts. A variable bass boost on the sub channel allows you to dial in some extra kick and impact to your system’s low-frequency sound. You can even add an optional wired remote to control the level of bass from your front seat.

High- and low-pass filters put you in command of the frequency spectrum that reaches your speakers and subs. The amp includes pre-amp- and speaker-level inputs, so you can install it in almost any vehicle, even one with a factory radio. When using the speaker-level inputs, the amp can sense the incoming signal and turn itself on, eliminating the need to run a separate turn-on wire to the receiver or fuse box.

Alpine S-Series amplifiers are available in two mono, a 4-channel and a 5-channel configuration.

The New 2023 S-Series Amplifiers
Entry-level sound just got elevated with the S2-A55V 5-Channel Amplifier. Its sleek redesign houses an Alpine Class-D amplifier circuit and is now certified for Hi-Res Audio.

Hi-Res Audio Certified
The Next-Gen Alpine S-Series S2-A55V 5-Channel Amplifier is Hi-Res Audio certified and able to reproduce up to 40kHz frequency response. This ultra-wide bandwidth coupled with the elevated S-Series design brings out a new benchmark for entry-level performance and price

Flexible Application
The Next-Gen S-Series amplifiers now feature a new selectable remote turn-on circuit, a three-position switch that ensures the amplifier turns on and off at the proper times. This design is crucial with newer, in-vehicle technology and allows for proper integration with any factory or aftermarket system.

Easy Control Access
The amplifier was intentionally designed with sound controls located on the side panels, instead of the top panel, making it easier to access gain and crossover controls when installed under vehicle seats or in shallow-depth locations. Removable end-caps were added to cover the side controls and connections, providing a clean, sleek finish to the amplifier.

Power a Full System
With its versatile 5-channel design, the S2-A55V Amplifier is the perfect solution to power your sound system all in a single chassis. This amplifier delivers crisp and clear audio to up to four speakers plus an additional subwoofer to give your system a complete audio upgrade.

Made for S-Series Speakers & Subs

The S-Series amplifiers are designed to perfectly match the Alpine S-Series speaker and subwoofer line for perfect system building. S-Series components are designed to for customers that want to build a great sounding system without breaking the bank, for a fun and great sounding experience including Hi-Res Audio capabilities.

Next-Gen Alpine S-Series Amplifiers: Power and Performance on a Budget

Watch as Alpine Brooks gives you an overview of the next generation of Alpine S-Series Amplifiers, which are designed to take your car audio experience to the next level without breaking the bank. With a sleek new redesign and upgraded features from their predecessors, these amplifiers offer exceptional performance and power on a budget. If you’re looking to upgrade your car’s factory audio system, the S-Series Amplifiers from Alpine could be for you.

00:00 - Intro
00:26 - Hi-Res Audio Certified
00:56 - Models & Overview
01:12 - Key Features of the 4 & 5 Channel Amps
02:41 - Key Features of Mono Amps
03:55 - Wrap Up

 FEATURES
Install


    Terminal Layout: Two-sided
    Included terminal covers
    Screw terminals (for speaker and power cables)

General

    Class-D Amplification (Digital)
    Hi-Res Audio Certified
    Channel Design: 5/4/3 Channel
    Side panel controls
    Thermal Management Control
    Top Mounted LED Power/Status Indicator
    Speaker Level Input
    3 turn-on modes (DC HI, Remote HI, Remote LO)
    Input Channel Selector Switch for Subwoofer
    Crossover: Variable Low-pass Filter (LPF) and High-Pass Filter (HPF),
    Adjustable Gain Control
    Bass EQ
    Remote Bass Control (RUX-KNOB2) Ready (for channel 5 only)

SPECIFICATIONS
RMS Power Ratings


    Per Channel into 2 Ohms, 14.4V (≤1%THD+N): 4 x 60W + 1 x 300W
    Per Channel into 4 Ohms, 14.4V (≤1%THD+N): 4 x 40W + 1 x 200W
    Bridged, 4 Ohms, 14.4V: 2 x 120W

Sound Tuning

    Crossover: Variable HPF/LPF: 50-400Hz (-12dB/oct  / -24dB/oct for subwoofer)
    Bass EQ (50Hz bass boost up to +12dB)

General

    Power Requirements: 14.4 V.DC (9 - 16 V allowable)
    Input Sensitivity (RCA Input): Hi: 0.5V - 10V / Low: 0.2V - 4.0V
    High Level Input with automatic power on
    Frequency Response: 10Hz – 40kHz
    THD+N (@ 10W into 4 Ohms): <0.03%
    Damping Factor: >100 (speaker channels) / > 750 (subwoofer channel)
    Weight: 3.2kg

Dimensions

    Heat Sink (WxHxD) mm: 302 x 57 x 210

Liisi järelmaks
%
%
aastas
kuus
Arvutus on ligikaudne ja võib erineda Teile pakutavatest tingimustest.

Koostöös Liisi järelmaksuga pakume oma klientidele võimalust tasuda toodete eest osadena. Järelmaksu võivad taotleda kõik vähemalt 18-aastased Eesti Vabariigi kodanikud või Eestis alalist elamisluba omavad inimesed.
- Minimaalne ostusumma 40€
- Minimaalne kuumakse 7€
- Lepingutasu 0-20€

Teenusepakkujaks on AS Koduliising . Iga laen on finantskohustus. Kaalu oma otsust hoolikalt – tutvu laenulepingu tingimustega ja vajadusel pea nõu asjatundjaga. Krediidi kulukuse määr on 39,40 % järgmistel näidistingimustel: kauba/teenuse maksumus 419 €, lepingu periood 12 kuud, fikseeritud intressimäär 20 % laenusummalt aastas, krediidisumma 419 €, maksete kogusumma 499,32 € ja tagasimaksete summa 499,32 €.

Kirjuta kommentaar

Märge: HTML kood ei ole lubatud!
    1>      <5
'XTRONS' keelab kirjutada kommentaare, mis ei vasta sisult hea tava reeglitele.
• sisaldavad ähvardusi
• sisaldavad solvanguid
• sisaldavad teemaväliseid linke, spämmi ja reklaami
• on sisutud ja/või teemavälised
• sisaldavad ebatsensuursed väljendusi ja labasusi
• kutsuvad üles narkootikumide või relvade kasutamisele

'XTRONS'l on õigus sellised kommentaarid kustutada ja piirata nende autorite ligipääsu kommentaaride kirjutamisele.