Alpine RS2-A36F S-Seeria 4-kanaliga võimendi 4 x 90W @ 2 Ohm
The next generation of Alpine S-Series amplifiers are designed to take your car audio experience to the next level without breaking the bank. With a sleek new redesign and upgraded features from their predecessors, these amplifiers offer exceptional performance and power on an affordable budget.
The S-Series S2-A36F 4-channel amplifier delivers 60 Watts RMS @4 Ohms or 90 Watts RMS @2 Ohms of pristine high-fidelity signal to each of your car’s front and rear speakers, adding sweet, clear sound to your vehicle.
The amp brings your music to life being Hi-Res Audio certified, with its precise details and emotional power clearly revealed with a frequency response up to 40kHz. For a 3-channel 2-way system, you could also use the amp to drive a pair of front speakers with 60 Watts RMS each, while powering a subwoofer with 180 Watts RMS from the bridged rear channels. A variable mid-bass boost on those rear channels allows you to dial in some extra kick and impact to your system’s low-frequency sound. You can even add the optional wired remote RUX-KNOB2 to control the level of the rear channels from your front seat.
High- and low-pass filters put you in command of the frequency spectrum that reaches your speakers and subs. The amp includes preamp- and speaker-level inputs, so you can install it in almost any vehicle, even one with a factory radio. When using the speaker-level inputs, the amp can sense the incoming signal and turn itself on, eliminating the need to run a separate turn-on wire to the receiver or fuse box.
S-Series amplifiers are available in two mono, a 4-channel and a 5-channel configuration.
The New 2023 S-Series Amplifiers
Entry-level sound just got elevated with the S2-A36F 4-Channel Amplifier. Its sleek redesign houses an Alpine Class-D Amplifier circuit and is now certified for Hi-Res Audio.
Hi-Res Audio Certified
The Next-Gen Alpine S-Series S2-A36F 4-Channel Amplifier is Hi-Res Audio Certified and able to reproduce up to 40kHz frequency response. This ultra-wide bandwidth coupled with the elevated S-Series design brings out a new benchmark for entry-level performance and price.
The Next-Gen S-Series Amplifiers now feature a new selectable remote turn-on circuit, a three-position switch that ensures the amplifier turns on and off at the proper times. This design is crucial with newer, in-vehicle technology and allows for proper integration with any factory or aftermarket system.
Easy Control Access
The amplifier was intentionally designed with sound controls located on the side panels, instead of the top panel, making it easier to access gain and crossover controls when installed under vehicle seats or in shallow-depth locations. Removable end-caps were added to cover the side controls and connections, providing a clean, sleek finish to the amplifier.
With its new and unique variable Mid-Bass EQ Circuit, the S2-A36F allows you to dial in the mid-bass impact as desired, making it an ideal choice for those seeking a more dynamic and powerful audio experience.
Made for S-Series Speakers & Subs
The S-Series amplifiers are designed to perfectly match the Alpine S-Series speaker and subwoofer line for perfect system building. S-Series components are designed to for customers that want to build a great sounding system without breaking the bank, for a fun and great sounding experience including Hi-Res Audio capabilities.
Next-Gen Alpine S-Series Amplifiers: Power and Performance on a Budget
Watch as Alpine Brooks gives you an overview of the next generation of Alpine S-Series Amplifiers, which are designed to take your car audio experience to the next level without breaking the bank. With a sleek new redesign and upgraded features from their predecessors, these amplifiers offer exceptional performance and power on a budget. If you’re looking to upgrade your car’s factory audio system, the S-Series Amplifiers from Alpine could be for you.
00:00 - Intro
00:26 - Hi-Res Audio Certified
00:56 - Models & Overview
01:12 - Key Features of the 4 & 5 Channel Amps
02:41 - Key Features of Mono Amps
03:55 - Wrap Up
Terminal Layout: Two-sided
Included terminal covers
Screw terminals (for speaker and power cables)
Class-D Amplification (Digital)
Hi-Res Audio Certified
Channel Design: 4/3/2 Channel
Side panel controls
Thermal Management Control
Top Mounted LED Power/Status Indicator
Speaker Level Input
3 turn-on modes (DC HI, Remote HI, Remote LO)
Crossover: Variable Low-pass Filter (LPF) and High-Pass Filter (HPF),
Adjustable Gain Control
Remote Bass Control (RUX-KNOB2) Ready (for channel 3+4 in bridged mode only)
RMS Power Ratings
Per Channel into 2 Ohms, 14.4V (≤1%THD+N): 4 x 90W
Per Channel into 4 Ohms, 14.4V (≤1%THD+N): 4 x 60W
Bridged, 4 Ohms, 14.4V: 2 x 180W
Crossover: Variable HPF/LPF: 50-400Hz (-12dB/oct )
Mid-Bass EQ (0 to +12dB)
Power Requirements: 14.4 V.DC (9 - 16 V allowable)
Input Sensitivity (RCA Input): Hi: 0.5V - 10V / Low: 0.2V - 4.0V
High Level Input with automatic power on
Cable size: Power Cable AWG 4, SPK Cable AWG 8
Frequency Response: 10Hz – 40kHz
THD+N (@ 10W into 4 Ohms): <0.03%
Damping Factor: >100
Heat Sink (WxHxD) mm: 220 x 57 x 210
Koostöös Liisi järelmaksuga pakume oma klientidele võimalust tasuda toodete eest osadena. Järelmaksu võivad taotleda kõik vähemalt 18-aastased Eesti Vabariigi kodanikud või Eestis alalist elamisluba omavad inimesed.
- Minimaalne ostusumma 40€
- Minimaalne kuumakse 7€
- Lepingutasu 0-20€
Teenusepakkujaks on AS Koduliising . Iga laen on finantskohustus. Kaalu oma otsust hoolikalt – tutvu laenulepingu tingimustega ja vajadusel pea nõu asjatundjaga. Krediidi kulukuse määr on 39,40 % järgmistel näidistingimustel: kauba/teenuse maksumus 419 €, lepingu periood 12 kuud, fikseeritud intressimäär 20 % laenusummalt aastas, krediidisumma 419 €, maksete kogusumma 499,32 € ja tagasimaksete summa 499,32 €.